Step-by-Step Guide: Upgrade Your Kenmore Bottom Freezer Refrigerator Water Filter in a Snap
What To Know
- Your Kenmore bottom freezer refrigerator is equipped with a water filter that plays a crucial role in removing impurities and contaminants from the water you drink and use for cooking.
- Before you begin replacing the filter, it is essential to turn off the water supply to the refrigerator.
- Can I use a generic water filter instead of a Kenmore brand filter.
Maintaining a clean and healthy water supply for your family is paramount. Your Kenmore bottom freezer refrigerator is equipped with a water filter that plays a crucial role in removing impurities and contaminants from the water you drink and use for cooking. Replacing this filter regularly is essential to ensure optimal performance and water quality. This comprehensive guide will provide you with a step-by-step walkthrough on how to change the water filter on your Kenmore bottom freezer refrigerator.
Step 1: Locate the Water Filter
The water filter is typically located in the bottom right-hand corner of the refrigerator compartment. It is housed in a plastic housing and has a blue cap on it.
Step 2: Turn Off the Water Supply
Before you begin replacing the filter, it is essential to turn off the water supply to the refrigerator. Locate the water supply valve, which is usually behind the refrigerator or under the sink. Turn the valve clockwise to shut off the water.
Step 3: Remove the Old Filter
Grip the blue cap on the old filter and twist it counterclockwise to loosen it. Once the cap is loose, pull the filter straight down to remove it from the housing.
Step 4: Clean the Filter Housing
Before installing the new filter, take some time to clean the filter housing. Use a damp cloth to wipe away any debris or dirt that may have accumulated.
Step 5: Insert the New Filter
Unwrap the new water filter and remove the protective caps from both ends. Align the filter with the filter housing and insert it straight up into the housing.
Step 6: Tighten the Filter Cap
Once the filter is in place, hand-tighten the blue cap clockwise until it is snug. Do not overtighten the cap.
Step 7: Reset the Filter Indicator
After replacing the filter, you need to reset the filter indicator. This indicator will remind you to replace the filter in the future. To reset it, locate the filter reset button on the control panel of the refrigerator. Press and hold the button for a few seconds until the indicator light turns off.
Turn On the Water Supply
Now that the new water filter is in place, turn on the water supply valve. Allow the water to run through the filter for a few minutes to flush out any air bubbles.
Frequently Asked Questions
How often should I change the water filter?
Kenmore recommends changing the water filter every six months or more often if you have high water usage.
What happens if I don’t change the water filter?
A clogged or expired water filter can lead to reduced water flow, poor water quality, and potential health hazards.
Can I use a generic water filter instead of a Kenmore brand filter?
While generic filters may fit, they may not perform as well as genuine Kenmore filters. Using a Kenmore brand filter ensures optimal performance and water quality.