What To Know
- The moisture sensor may be faulty, causing the dryer to detect moisture even when there is none, preventing it from heating.
- By following the steps outlined in this guide, you can troubleshoot and reset your LG electric dryer not heating.
- A blown thermal fuse will prevent the dryer from heating and may also cause the dryer to shut off prematurely.
If your LG electric dryer is not heating, it can be a frustrating experience. The good news is that resetting your dryer can often solve this issue. In this comprehensive guide, we will walk you through the step-by-step process on how to reset LG electric dryer not heating, as well as troubleshoot potential underlying causes.
Safety Precautions
Before you begin any troubleshooting or resetting procedures, always unplug your dryer from the power outlet for safety.
Troubleshooting
Before resetting your dryer, check the following:
- Power: Ensure that the power cord is securely plugged into an outlet and that the circuit breaker or fuse is not tripped.
- Lint Trap: Clean the lint trap thoroughly as excessive lint buildup can restrict airflow and prevent heating.
- Heating Element: Check the heating element for continuity using a multimeter. If there is no continuity, the heating element may need to be replaced.
Resetting the Dryer
If the above troubleshooting steps do not resolve the issue, you can try resetting the dryer:
1. Unplug the Dryer: Unplug the dryer from the power outlet.
2. Wait 5 Minutes: Allow the dryer to sit unplugged for at least 5 minutes.
3. Plug the Dryer Back In: Plug the dryer back into the power outlet.
4. Start a Test Cycle: Start a short test cycle (e.g., 10 minutes) to see if the heating element is working properly.
Common Causes of Heating Issues
If resetting the dryer does not solve the issue, there may be an underlying problem. Common causes include:
- Faulty Heating Element: The heating element may have burned out or become damaged.
- Thermal Fuse: The thermal fuse may have blown due to overheating.
- Control Board: The control board may have malfunctioned, preventing the heating element from receiving power.
- Wiring: There may be a loose or damaged wire in the electrical system.
- Moisture Sensor: The moisture sensor may be faulty, causing the dryer to detect moisture even when there is none, preventing it from heating.
Repairing the Dryer
If you suspect an underlying issue, it is recommended to contact a qualified appliance repair technician for diagnosis and repair. Attempting to repair the dryer yourself can be dangerous and void the warranty.
Tips for Maintaining Your Dryer
To prevent heating issues and extend the lifespan of your LG electric dryer, follow these tips:
- Clean the Lint Trap Regularly: Clean the lint trap after every use to ensure proper airflow.
- Use the Correct Cycle: Select the appropriate cycle for the type of fabric you are drying.
- Avoid Overloading the Dryer: Do not overload the dryer as it can restrict airflow and prevent heating.
- Inspect the Heating Element: Periodically inspect the heating element for any damage or corrosion.
- Have the Dryer Serviced Regularly: Schedule regular maintenance with a qualified technician to inspect and clean the dryer.
Conclusion
By following the steps outlined in this guide, you can troubleshoot and reset your LG electric dryer not heating. If the issue persists, it is important to contact a qualified appliance repair technician for further diagnosis and repair. Proper maintenance and care can help prevent heating issues and extend the lifespan of your dryer.
FAQ
1. Why is my dryer not heating after I reset it?
- There may be an underlying issue such as a faulty heating element, thermal fuse, control board, wiring, or moisture sensor.
2. Can I replace the heating element myself?
- Replacing the heating element can be dangerous and should only be attempted by a qualified technician.
3. How often should I clean the lint trap?
- Clean the lint trap after every use to prevent lint buildup and ensure proper airflow.
4. What are the signs of a faulty thermal fuse?
- A blown thermal fuse will prevent the dryer from heating and may also cause the dryer to shut off prematurely.
5. Can I test the control board myself?
- Testing the control board requires specialized equipment and knowledge. It is best left to a qualified technician.
