What To Know
- If the thermistor is damaged, it can send incorrect temperature readings to the control board, which can lead to the FlowSense error.
- Understanding the causes and troubleshooting steps for the FlowSense error on your LG dryer empowers you to resolve the issue effectively.
- By following the guidelines outlined in this blog post, you can restore your dryer to optimal performance and avoid the frustration of the persistent FlowSense message.
The FlowSense error message on your LG dryer is a common issue that can be frustrating and disrupt your laundry routine. Understanding the reasons behind this error is crucial for addressing the problem effectively. In this comprehensive blog post, we will delve into the various causes of the FlowSense message and provide step-by-step solutions to resolve it.
What Is FlowSense?
FlowSense is a feature in LG dryers that monitors airflow throughout the drying cycle. It ensures that the dryer is operating efficiently and that clothes are drying properly. When the FlowSense system detects a problem with airflow, it displays the FlowSense error message to alert the user.
Common Causes of the FlowSense Error
1. Clogged Lint Filter: The lint filter is responsible for trapping lint and debris during the drying cycle. A clogged lint filter can restrict airflow, leading to the FlowSense error.
2. Blocked Exhaust Vent: The exhaust vent allows moist air to escape from the dryer. A blocked exhaust vent can cause backpressure, which can trigger the FlowSense error.
3. Faulty Airflow Sensor: The airflow sensor monitors airflow and sends data to the dryer’s control board. A faulty airflow sensor can provide inaccurate readings, resulting in the FlowSense error.
4. Damaged Thermistor: The thermistor measures the temperature inside the dryer. If the thermistor is damaged, it can send incorrect temperature readings to the control board, which can lead to the FlowSense error.
5. Defective Control Board: The control board is the brain of the dryer and controls all its functions. A defective control board can malfunction and cause the FlowSense error.
Troubleshooting the FlowSense Error
1. Clean the Lint Filter: Regularly check and clean the lint filter before each drying cycle to ensure optimal airflow.
2. Inspect the Exhaust Vent: Disconnect the dryer from the power source and inspect the exhaust vent for any blockages or kinks. Remove any obstructions and ensure that the vent is clear.
3. Test the Airflow Sensor: Use a multimeter to test the continuity of the airflow sensor. If the sensor is faulty, it will need to be replaced.
4. Replace the Thermistor: Use a multimeter to test the resistance of the thermistor. If the thermistor is damaged, it will need to be replaced.
5. Reset the Control Board: Unplug the dryer from the power source for a few minutes. Plug it back in and press the start button. If the FlowSense error persists, it may indicate a defective control board that needs to be replaced.
Additional Tips
- Check the dryer’s user manual for specific instructions on troubleshooting the FlowSense error.
- If you are not comfortable performing the troubleshooting steps yourself, contact a qualified appliance repair technician.
- Regularly maintain your dryer by cleaning the lint filter and inspecting the exhaust vent to prevent future FlowSense errors.
Beyond the FlowSense Frustration: Optimizing Your LG Dryer’s Performance
1. Use the Correct Drying Cycle: Select the appropriate drying cycle for the type of fabric you are drying. Over-drying can damage clothes and trigger the FlowSense error.
2. Avoid Overloading the Dryer: Do not overload the dryer with too many clothes. Overloading can restrict airflow and cause the FlowSense error.
3. Clean the Condenser: If your LG dryer has a condenser, clean it regularly to maintain optimal airflow.
4. Inspect the Door Seal: Ensure that the door seal is in good condition and forms a tight seal around the dryer door. A damaged door seal can allow moisture and lint to escape, affecting airflow.
Unlocking the Secrets of the FlowSense Message
Understanding the causes and troubleshooting steps for the FlowSense error on your LG dryer empowers you to resolve the issue effectively. By following the guidelines outlined in this blog post, you can restore your dryer to optimal performance and avoid the frustration of the persistent FlowSense message. Remember to maintain your dryer regularly to prevent future issues and enjoy hassle-free laundry days.
What You Need to Learn
Q: Why does my LG dryer keep saying FlowSense even after I have cleaned the lint filter?
A: The problem may lie in a blocked exhaust vent, faulty airflow sensor, damaged thermistor, or defective control board. Check and troubleshoot these components accordingly.
Q: Can I reset the FlowSense error on my LG dryer?
A: Yes, you can reset the FlowSense error by unplugging the dryer from the power source for a few minutes and then plugging it back in.
Q: How often should I clean the exhaust vent on my LG dryer?
A: It is recommended to clean the exhaust vent every 6-12 months, depending on usage and the length of the vent.
