DIY Magic Follow these Easy Instructions to Change the Water Filter in your GE French Door Refrigerator
What To Know
- The water filter housing is typically located on the front or side of the refrigerator, inside the refrigerator compartment.
- A clogged water filter can reduce the flow of water from the dispenser, affect the taste and odor of the water, and potentially harbor bacteria.
- Signs that your water filter needs to be replaced include reduced water flow, a change in taste or odor, or a blinking water filter indicator light.
If you’re wondering how to change the water filter in your GE French door refrigerator, you’ve come to the right place. In this comprehensive guide, we’ll take you through the process step by step, ensuring that your refrigerator’s water remains clean and fresh.
Materials You’ll Need
Before you start, gather the following materials:
- New GE water filter
- Clean cloth or paper towels
Safety Precautions
Before handling any electrical appliances, always unplug the refrigerator from the power outlet. This will prevent any electrical shocks or damage to the appliance.
Locating the Water Filter
1. Find the Water Filter Housing:
The water filter housing is typically located on the front or side of the refrigerator, inside the refrigerator compartment. It’s usually a white or blue plastic component with a lever or button.
2. Open the Housing:
Locate the lever or button on the housing and press or pull it to open the door.
Removing the Old Filter
3. Remove the Old Filter:
Once the housing is open, gently pull the old filter straight out. It should come out easily without any resistance.
4. Discard the Old Filter:
Dispose of the old filter according to local regulations. Do not recycle it.
Installing the New Filter
5. Unwrap the New Filter:
Remove the new filter from its packaging and discard the packaging.
6. Insert the New Filter:
Align the new filter with the guides inside the housing and gently push it in until it clicks into place. Make sure it’s fully seated and secure.
7. Close the Housing:
Once the filter is inserted, close the housing by pushing or pulling the lever or button. Ensure it’s securely closed.
Resetting the Filter Indicator
8. Reset the Filter Indicator (Optional):
Some GE refrigerators have a water filter indicator that should be reset after replacing the filter. To reset it, locate the “Filter Reset” button on the control panel and press and hold it for a few seconds until the indicator light turns off.
Purging the Water Lines
9. Purge the Water Lines:
After replacing the filter, run water through the dispenser for several minutes to purge the air and any loose carbon from the lines. Discard the first few glasses of water.
Enjoy Clean, Fresh Water
Your refrigerator’s water filter is now successfully replaced, and you can enjoy clean, fresh water from the dispenser. Remember to replace the filter every 6 months or as recommended by the manufacturer.
FAQ
1. How often should I change the water filter in my GE French door refrigerator?
GE recommends changing the water filter every 6 months or as needed.
2. What happens if I don’t replace the water filter?
A clogged water filter can reduce the flow of water from the dispenser, affect the taste and odor of the water, and potentially harbor bacteria.
3. Can I use a different brand of water filter in my GE refrigerator?
No, it’s recommended to use only GE-branded water filters to ensure compatibility and optimal performance.
4. How do I know if my water filter needs to be replaced?
Signs that your water filter needs to be replaced include reduced water flow, a change in taste or odor, or a blinking water filter indicator light.
5. Where can I purchase a new water filter for my GE French door refrigerator?
You can purchase GE water filters from appliance stores, hardware stores, or online retailers.