What To Know
- The simplest way to clear most error codes is to reset the dishwasher.
- , “WS”), ensure that the water supply to the dishwasher is turned on and the water pressure is adequate.
- A faulty door latch can prevent the dishwasher from starting a wash cycle, resulting in error codes such as “DL.
LG dishwashers are known for their reliability and efficiency. However, like any appliance, they can occasionally encounter problems that may manifest as error codes. These codes provide valuable information about the issue at hand, enabling you to troubleshoot and resolve the problem effectively. This blog post will provide a comprehensive guide on how to clear LG dishwasher error codes, ensuring your appliance operates smoothly again.
Understanding LG Dishwasher Error Codes
LG dishwashers display error codes on the control panel to indicate a specific issue. These codes typically consist of a letter followed by a number, such as “LE” or “OE.” Each code corresponds to a particular component or function within the dishwasher. For example, “LE” indicates a leak error, while “OE” represents an overflow error.
Locating the Error Code
To locate the error code on your LG dishwasher, follow these steps:
1. Open the dishwasher door.
2. Look for a small display screen on the control panel.
3. If an error code is present, it will be displayed on the screen.
Clearing LG Dishwasher Error Codes
Once you have identified the error code, you can proceed to clear it. Here’s how:
1. Reset the Dishwasher
The simplest way to clear most error codes is to reset the dishwasher. To do this:
1. Unplug the dishwasher from the power outlet.
2. Wait for 30 seconds.
3. Plug the dishwasher back in.
4. Start a new wash cycle.
2. Check for Leaks
If you encounter a leak error code (e.g., “LE”), inspect the dishwasher for any leaks. Check the door gasket, water lines, and drain hose for damage or loose connections. If a leak is detected, repair or replace the affected component.
3. Clear the Drain Filter
A clogged drain filter can cause an overflow error code (e.g., “OE”). To clear the filter:
1. Open the dishwasher door.
2. Locate the drain filter at the bottom of the dishwasher tub.
3. Unscrew the filter and remove any debris or food particles.
4. Rinse the filter and reinstall it.
4. Check the Water Supply
If you encounter a water supply error code (e.g., “WS”), ensure that the water supply to the dishwasher is turned on and the water pressure is adequate. Check the water inlet valve and hoses for any kinks or blockages.
5. Clean the Spray Arms
Clogged spray arms can impede water flow, leading to error codes related to cleaning performance. To clean the spray arms:
1. Remove the upper and lower spray arms by unscrewing them.
2. Use a toothpick or small brush to remove any debris from the spray holes.
3. Rinse the spray arms and reinstall them.
6. Inspect the Door Latch
A faulty door latch can prevent the dishwasher from starting a wash cycle, resulting in error codes such as “DL.” To check the door latch:
1. Open and close the dishwasher door several times.
2. Listen for a clicking sound when the door is closed.
3. If the door latch does not engage properly, it may need to be replaced.
7. Contact a Service Technician
If the error code persists after trying the above steps, it may indicate a more complex issue that requires professional attention. In such cases, contact an authorized LG service technician for further diagnosis and repair.
Troubleshooting Tips
Here are some additional troubleshooting tips for clearing LG dishwasher error codes:
- Refer to the user manual for specific error code explanations and troubleshooting instructions.
- Use a flashlight to inspect the dishwasher for any visible issues.
- Unplug the dishwasher before performing any maintenance or repairs.
- If you are not comfortable troubleshooting the dishwasher yourself, seek professional assistance.
The Bottom Line: Resolving LG Dishwasher Error Codes Effectively
By following the steps outlined in this guide, you can effectively clear LG dishwasher error codes and restore your appliance to optimal performance. Remember to thoroughly troubleshoot the issue, check for potential leaks or blockages, and clear the drain filter regularly. If you encounter any persistent error codes, do not hesitate to contact an authorized LG service technician for assistance.
Basics You Wanted To Know
Q: Why is my LG dishwasher displaying an error code?
A: Error codes indicate a specific issue within the dishwasher, such as a leak, overflow, or faulty component.
Q: How do I reset my LG dishwasher?
A: To reset your LG dishwasher, unplug it for 30 seconds and then plug it back in.
Q: What does the “LE” error code mean?
A: The “LE” error code indicates a leak in the dishwasher. Check for leaks around the door gasket, water lines, and drain hose.
Q: How often should I clean the drain filter in my LG dishwasher?
A: It is recommended to clean the drain filter in your LG dishwasher every 1-2 months to prevent clogs.
Q: Can I clear LG dishwasher error codes myself?
A: Yes, you can clear most LG dishwasher error codes by following the troubleshooting steps outlined in this guide. However, if the error code persists, it is advisable to contact an authorized LG service technician.
