What To Know
- Locate the dryer vent at the back of the appliance and remove the screws holding it in place.
- Follow the instructions provided with the LP gas conversion kit to install the new burner assembly, gas valve, and orifice.
- Attach the propane regulator to the propane tank and connect the propane hose to the regulator.
Are you tired of the limitations of electric dryers and ready to embrace the convenience and efficiency of LP gas? Converting your Electrolux dryer to LP is a straightforward process that can save you time, money, and energy. In this comprehensive guide, we will walk you through every step of the conversion process, ensuring a seamless transition for your appliance.
Gather the Necessary Tools and Materials
Before embarking on this project, gather the following tools and materials:
- Adjustable wrench
- Socket set
- Screwdriver
- LP gas conversion kit
- Propane regulator
- Propane hose
- Pipe sealant
Step 1: Disconnect the Dryer
Begin by unplugging the dryer from the electrical outlet and disconnecting the gas line. Turn off the gas valve at the source.
Step 2: Remove the Dryer Vent
Locate the dryer vent at the back of the appliance and remove the screws holding it in place. Carefully disconnect the vent hose and set it aside.
Step 3: Remove the Control Panel
Using a screwdriver, remove the screws holding the control panel in place. Gently lift the panel off the dryer and disconnect the electrical wires.
Step 4: Remove the Burner Assembly
Unscrew the bolts holding the burner assembly in place and carefully remove it. Disconnect the gas line and electrical wires from the burner assembly.
Step 5: Install the Conversion Kit
Follow the instructions provided with the LP gas conversion kit to install the new burner assembly, gas valve, and orifice. Ensure that all connections are tight and secure.
Step 6: Connect the Propane Regulator and Hose
Attach the propane regulator to the propane tank and connect the propane hose to the regulator. Tighten all connections using an adjustable wrench.
Step 7: Reinstall the Control Panel and Dryer Vent
Reinstall the control panel by connecting the electrical wires and securing it with screws. Reattach the dryer vent hose and screws.
Step 8: Test the Dryer
Turn on the gas valve and propane tank. Plug the dryer into the electrical outlet and start a drying cycle. Monitor the dryer for proper operation and adjust the gas pressure as necessary.
Troubleshooting Tips
- Dryer won’t start: Check the electrical connections and gas supply.
- Dryer not heating: Verify that the burner assembly is properly installed and the gas valve is open.
- Dryer overheating: Adjust the gas pressure or check for airflow obstructions.
What People Want to Know
Q: Can I convert any Electrolux dryer to LP?
A: Most Electrolux dryers can be converted to LP, but it’s always best to consult the manufacturer’s specifications.
Q: What is the cost of converting an Electrolux dryer to LP?
A: The cost varies depending on the conversion kit and propane accessories required. Typically, it ranges from $100 to $250.
Q: Is it safe to convert an Electrolux dryer to LP myself?
A: If you have basic electrical and plumbing skills, you can safely convert your dryer yourself. However, if you are unsure, it’s recommended to hire a qualified technician.
