What To Know
- Disconnect the drain hose from the back of the washing machine by loosening the clamp or detaching the hose from the drain pipe.
- Once the water is drained, reconnect the drain hose to the washing machine and the drain pipe.
- What should I do if the water is not draining after following the steps in the guide.
If you’re experiencing water buildup or drainage issues with your Kenmore washing machine, knowing how to drain it effectively becomes crucial. This comprehensive guide will walk you through the step-by-step process, ensuring a hassle-free draining experience.
Safety Precautions
Before proceeding, ensure your safety by unplugging the washing machine from the power outlet and turning off the water supply.
Locating the Drain Hose
The drain hose is typically located at the rear or bottom of the washing machine. It is a flexible, corrugated hose with a diameter of about 1 inch.
Step 1: Disconnect the Drain Hose
Disconnect the drain hose from the back of the washing machine by loosening the clamp or detaching the hose from the drain pipe.
Step 2: Position a Container
Place a large bucket or container under the drain hose to collect the water.
Step 3: Drain the Water
Tilt the washing machine slightly towards the drain hose and allow the water to flow out. If the water flow is slow, use a wet/dry vacuum to extract the remaining water.
Step 4: Reconnect the Drain Hose
Once the water is drained, reconnect the drain hose to the washing machine and the drain pipe. Tighten the clamp or reattach the hose securely.
Step 5: Check for Clogs
Inspect the drain hose and the drain pipe for any clogs or obstructions. Remove any debris or clogs you find to prevent future drainage problems.
Step 6: Test the Drain
Run a short wash cycle without any clothes to test the draining function. If the water drains properly, the issue has been resolved.
Troubleshooting Common Drainage Issues
Water Not Draining
- Clogged drain hose or drain pipe
- Faulty drain pump
- Blocked drain filter
Water Draining Slowly
- Kinked or crushed drain hose
- Partially clogged drain hose or drain pipe
- Worn or damaged drain pump
Water Leaking from the Drain Hose
- Loose or damaged clamp
- Cracked or punctured drain hose
- Faulty drain pump gasket
How to Prevent Drainage Problems
- Regularly clean the drain filter to remove lint and debris.
- Inspect the drain hose and drain pipe for any damage or kinks.
- Avoid overloading the washing machine with clothes.
- Use the correct detergent and fabric softener to prevent excessive sudsing.
Wrap-Up
Draining your Kenmore washing machine is a simple task that can be easily accomplished by following the steps outlined in this guide. By maintaining your washing machine and addressing any drainage issues promptly, you can ensure its optimal performance and longevity.
What You Need to Learn
Q: How often should I clean the drain filter?
A: It is recommended to clean the drain filter every 3-4 months or as needed.
Q: Can I use bleach to clean the drain hose?
A: No, do not use bleach to clean the drain hose as it can damage the material.
Q: What should I do if the water is not draining after following the steps in the guide?
A: If the water is still not draining, it is likely caused by a more complex issue. Contact a qualified appliance repair technician for assistance.
