What To Know
- It is recommended to clean the drain hose and filter every 3-6 months or more frequently if you use the dishwasher heavily.
- Is it safe to use a chemical drain cleaner to fix the LG dishwasher NE error.
- No, it is not advisable to use a chemical drain cleaner to fix the NE error.
Are you facing the dreaded NE error on your LG dishwasher, leaving you with a sink full of dirty dishes? Don’t despair! This comprehensive guide will provide you with step-by-step instructions on how to resolve this common issue and restore your dishwasher to its pristine working condition.
Understanding the LG Dishwasher NE Error
The NE error code in LG dishwashers typically indicates a problem with the drain system. This error can be caused by various factors, including:
- Clogged drain hose or filter
- Faulty drain pump
- Issues with the water supply
How to Fix LG Dishwasher NE Error
1. Check for Clogs in the Drain Hose and Filter
- Disconnect the dishwasher from the power supply.
- Locate the drain hose, usually connected to the bottom of the dishwasher.
- Inspect the hose for any kinks or obstructions. Clear any blockages you find.
- Remove the drain filter from the bottom of the dishwasher and clean it thoroughly.
2. Inspect the Drain Pump
- Disconnect the dishwasher from the power supply.
- Locate the drain pump, typically found at the bottom of the dishwasher.
- Remove the pump and check for any blockages or debris.
- If the pump is damaged or faulty, it may need to be replaced.
3. Check the Water Supply
- Ensure that the water supply to the dishwasher is turned on.
- Inspect the water inlet hose for any kinks or leaks.
- If the water supply is inadequate, the dishwasher may not be able to drain properly.
4. Reset the Dishwasher
- Turn off the power to the dishwasher.
- Wait for 30 seconds.
- Turn the power back on.
- Start a normal wash cycle.
5. Check the Door Latch
- Make sure that the dishwasher door is properly closed and latched.
- A loose or damaged door latch can prevent the dishwasher from draining properly.
6. Clean the Float Switch
- Locate the float switch, usually found in the bottom of the dishwasher.
- Clean the switch with a soft cloth to remove any debris or buildup that may be preventing it from functioning correctly.
7. Inspect the Control Board
- If all other troubleshooting steps fail, the problem may be with the control board.
- Contact a qualified appliance technician to diagnose and repair any issues with the control board.
Tips for Preventing LG Dishwasher NE Error
- Regularly clean the drain hose and filter to prevent clogs.
- Avoid overloading the dishwasher with dishes.
- Use the correct amount of detergent and rinse aid.
- Run a hot water cycle periodically to dissolve any grease or buildup in the drain system.
The Bottom Line: Troubleshooting LG Dishwasher NE Error with Confidence
By following these troubleshooting steps, you can effectively resolve the NE error on your LG dishwasher and restore its optimal performance. Remember to exercise caution when working on electrical appliances and seek professional assistance if necessary. With a little patience and persistence, you can tackle this issue and enjoy sparkling clean dishes once again.
Frequently Discussed Topics
Q: Can I fix the LG dishwasher NE error myself?
A: Yes, with some basic troubleshooting skills, you can resolve the NE error yourself by following the steps outlined in this guide. However, if you encounter any difficulties or suspect a more serious issue, do not hesitate to contact a qualified appliance technician.
Q: How often should I clean the drain hose and filter?
A: It is recommended to clean the drain hose and filter every 3-6 months or more frequently if you use the dishwasher heavily. This will help prevent clogs and ensure the smooth operation of your dishwasher.
Q: Is it safe to use a chemical drain cleaner to fix the LG dishwasher NE error?
A: No, it is not advisable to use a chemical drain cleaner to fix the NE error. These cleaners can be harmful to the dishwasher’s components and may cause further damage.
