What To Know
- Ensure that the dryer is properly connected to a power outlet and that the circuit breaker or fuse is not tripped.
- To test the moisture sensor, place a damp cloth in the dryer and run a short drying cycle.
- Fixing the LG dryer NP error is a straightforward process that can be easily accomplished with the right troubleshooting steps.
If your LG dryer is displaying an NP error code, don’t panic! This common issue can be easily resolved with the right troubleshooting steps. In this comprehensive guide, we’ll explore the causes behind the NP error and provide detailed instructions on how to fix it effectively.
Understanding the LG Dryer NP Error
The NP error code typically indicates a problem with the dryer’s moisture sensor. This sensor monitors the moisture levels inside the drum and adjusts the drying cycle accordingly. When the sensor malfunctions, the dryer may not be able to determine when clothes are dry, leading to over-drying or under-drying.
Troubleshooting the LG Dryer NP Error
1. Check the Power Supply
Ensure that the dryer is properly connected to a power outlet and that the circuit breaker or fuse is not tripped.
2. Clean the Lint Filter
A clogged lint filter can restrict airflow and affect the moisture sensor‘s performance. Clean the lint filter after each load and check for any blockages.
3. Inspect the Moisture Sensor Bars
Locate the moisture sensor bars inside the dryer drum. They are usually two metal strips located near the front of the drum. Check for any dirt or debris that may be interfering with the sensor. Clean the bars with a soft cloth or compressed air.
4. Test the Moisture Sensor
To test the moisture sensor, place a damp cloth in the dryer and run a short drying cycle. If the dryer stops before the cloth is fully dry, the sensor may be faulty.
5. Reset the Dryer
Unplug the dryer from the power outlet for 30 minutes to reset it. This can sometimes resolve minor software glitches that may be causing the NP error.
6. Check the Exhaust Duct
A clogged exhaust duct can restrict airflow and affect the moisture sensor‘s readings. Check the exhaust duct for any blockages or kinks and clean it if necessary.
7. Contact LG Customer Support
If the above troubleshooting steps do not resolve the NP error, contact LG Customer Support. They can diagnose the issue further and provide professional assistance.
Other Potential Causes of the LG Dryer NP Error
- Faulty control board
- Malfunctioning temperature sensor
- Damaged wiring
- Software issue
Wrapping Up
Fixing the LG dryer NP error is a straightforward process that can be easily accomplished with the right troubleshooting steps. By following the instructions outlined in this guide, you can restore your dryer to optimal performance and enjoy hassle-free drying.
Frequently Asked Questions
Q: Why is my LG dryer displaying the NP error?
A: The NP error code typically indicates a problem with the dryer’s moisture sensor.
Q: How can I clean the moisture sensor bars?
A: Use a soft cloth or compressed air to remove any dirt or debris from the moisture sensor bars.
Q: What should I do if the troubleshooting steps don’t resolve the NP error?
A: Contact LG Customer Support for professional assistance.
