What To Know
- If necessary, use a flat head screwdriver to adjust the screws slightly until the handles are properly aligned.
- Once the handles are installed and the door is secure, plug the refrigerator back into the power source.
- Ensure that the handle brackets are properly aligned and attached to the refrigerator door.
Are you looking to upgrade your Hisense refrigerator‘s aesthetics or replace worn-out handles? This comprehensive guide will provide you with step-by-step instructions on how to install Hisense refrigerator handles effortlessly.
Tools and Materials You’ll Need
- New Hisense refrigerator handles
- Phillips head screwdriver
- Flat head screwdriver
- Measuring tape
- Pencil or pen
- Level
Step 1: Safety First
Before starting, ensure that the refrigerator is unplugged and disconnected from the power source.
Step 2: Remove the Old Handles
- Locate the screws that secure the handles to the refrigerator door.
- Using a Phillips head screwdriver, carefully remove the screws.
- Gently pull the old handles straight outward to detach them.
Step 3: Measure and Mark the Handle Positions
- Use a measuring tape to determine the exact location of the new handles.
- Mark the positions with a pencil or pen.
- Ensure that the handles are aligned and level.
Step 4: Align and Position the New Handles
- Align the new handles with the marked positions.
- Check the handles’ orientation to ensure they are facing the correct direction.
Step 5: Secure the Handles
- Insert the screws provided with the new handles into the marked holes.
- Use a Phillips head screwdriver to tighten the screws securely.
- Ensure that the handles are firmly attached.
Step 6: Adjust and Level the Handles
- Use a level to check if the handles are level.
- If necessary, use a flat head screwdriver to adjust the screws slightly until the handles are properly aligned.
Step 7: Reinstall the Refrigerator Door
- Carefully lift the refrigerator door back into place.
- Ensure that the door is aligned and closes smoothly.
Step 8: Plug the Refrigerator Back In
- Once the handles are installed and the door is secure, plug the refrigerator back into the power source.
Success! Enjoy Your Upgraded Refrigerator
Congratulations! You have successfully installed your new Hisense refrigerator handles. Now, you can enjoy the enhanced functionality and aesthetics of your refreshed appliance.
Tips for a Smooth Installation
- Use the correct size screws to avoid damaging the handles or refrigerator door.
- Be careful not to overtighten the screws.
- Double-check the alignment and level of the handles before securing them.
- If you encounter any difficulties, refer to the manufacturer’s instructions or seek professional assistance.
Basics You Wanted To Know
1. The handles are loose or shaky.
- Check if the screws are tightened securely.
- Ensure that the handle brackets are properly aligned and attached to the refrigerator door.
2. The handles are not aligned.
- Remeasure and mark the handle positions accurately.
- Adjust the screws to level the handles.
3. The refrigerator door is not closing properly.
- Ensure that the handles are not obstructing the door seal.
- Check if the door hinges are aligned and adjusted correctly.
4. I’m having trouble removing the old handles.
- Use a penetrating lubricant to loosen any stuck screws.
- If the screws are stripped, you may need to drill them out and replace them with new ones.
