What To Know
- Remove the outlet cover and connect the black wire from the microwave to the brass screw terminal.
- Connect the white wire to the silver screw terminal and the green or bare wire to the green screw terminal.
- While it is possible to install the microwave yourself, it is recommended to hire a qualified electrician if you are not comfortable with electrical work or if the installation requires any modifications to your electrical system.
Upgrading your kitchen with a new Whirlpool Microwave WML55011HS? Congratulations! This comprehensive guide will walk you through the installation process seamlessly. Whether you’re a seasoned DIY enthusiast or a novice, follow these detailed steps to ensure a safe and efficient setup.
Materials and Tools Required
- Whirlpool Microwave WML55011HS
- Power drill
- Screwdriver
- Level
- Measuring tape
- Electrical tape
- Safety glasses
Step 1: Site Preparation
- Choose a location that provides ample ventilation and clearance around the microwave.
- Ensure the countertop is level and can support the weight of the microwave.
- Mark the mounting bracket holes on the wall using the template provided.
Step 2: Installing the Mounting Bracket
- Drill pilot holes into the wall at the marked locations.
- Insert the provided screws into the holes and tighten them securely.
- Hang the mounting bracket on the screws.
Step 3: Connecting the Electrical Outlet
- Turn off the power to the designated electrical outlet.
- Remove the outlet cover and connect the black wire from the microwave to the brass screw terminal.
- Connect the white wire to the silver screw terminal and the green or bare wire to the green screw terminal.
- Secure the wires with electrical tape and replace the outlet cover.
Step 4: Installing the Microwave
- Lift the microwave and align it with the mounting bracket.
- Carefully slide the microwave onto the bracket until it clicks into place.
- Secure it with the provided screws.
Step 5: Leveling the Microwave
- Use a level to check if the microwave is level.
- If necessary, adjust the screws on the mounting bracket to level it properly.
Step 6: Installing the Trim Kit (Optional)
- If you purchased a trim kit, follow the manufacturer’s instructions for installation.
- Typically, it involves attaching the trim to the cabinet and sliding it over the microwave.
Step 7: Testing the Microwave
- Turn on the power to the outlet.
- Open the microwave door and place a glass of water inside.
- Set the microwave to high power and heat the water for 1-2 minutes.
- Check if the water boils or heats up significantly to confirm proper operation.
Troubleshooting Tips
- If the microwave does not turn on, check the electrical connections and fuses.
- If the microwave sparks or makes a humming noise, turn it off immediately and contact a qualified electrician.
- If the microwave does not heat food, check the magnetron or high-voltage diode.
Frequently Asked Questions
Q: Can I install the microwave myself?
A: Yes, with the right tools and following the steps outlined in this guide, you can install the microwave yourself.
Q: How long does it take to install the microwave?
A: The installation process typically takes around 1-2 hours, depending on your experience and the complexity of the installation.
Q: Is it necessary to hire a professional to install the microwave?
A: While it is possible to install the microwave yourself, it is recommended to hire a qualified electrician if you are not comfortable with electrical work or if the installation requires any modifications to your electrical system.
