What To Know
- Open the dishwasher door and place a towel or rag on the floor in front of it to absorb any excess water.
- By following the steps outlined in this guide, you can ensure that your dishwasher is functioning optimally and provide a clean and sanitary environment for your dishes.
- No, bleach should not be used to clean the drain filter as it can damage the filter and the dishwasher components.
Are you tired of your GE dishwasher leaving behind a pool of water after every cycle? If so, it’s time to learn how to just drain GE dishwasher. Draining your dishwasher can resolve several issues, including standing water, unpleasant odors, and potential mold growth. This comprehensive guide will provide you with a step-by-step breakdown of the entire process, ensuring that your dishwasher is drained efficiently and effectively.
Materials You’ll Need
- Towel or rag
- Shallow pan or bucket
- Screwdriver (optional)
Step 1: Safety First
Before you begin draining your dishwasher, it’s crucial to ensure safety. Unplug the dishwasher from the electrical outlet and turn off the water supply. This will prevent any electrical hazards or water damage during the draining process.
Step 2: Remove Standing Water
Open the dishwasher door and place a towel or rag on the floor in front of it to absorb any excess water. Use a shallow pan or bucket to scoop out as much standing water as possible. Be careful not to splash water onto the floor or surrounding areas.
Step 3: Locate the Drain Filter
The drain filter is typically located at the bottom of the dishwasher, near the center. It’s a cylindrical or square-shaped component with a cap or cover.
Step 4: Remove the Drain Filter
Depending on your dishwasher model, you may need to use a screwdriver to remove the drain filter cap. Once the cap is loose, you can unscrew the filter by hand. Be prepared for some water to leak out as you remove the filter.
Step 5: Clean the Drain Filter
Examine the drain filter for any food particles, debris, or clogs. Rinse the filter thoroughly under running water to remove any buildup. If the filter has stubborn clogs, you can use a soft brush or toothpick to gently dislodge them.
Step 6: Inspect the Drain Hose
While the drain filter is removed, take this opportunity to inspect the drain hose. Check for any kinks, bends, or blockages that could prevent water from draining properly. If necessary, straighten the hose or remove any obstructions.
Step 7: Reinstall the Drain Filter
Once the drain filter and hose are clean, reinstall the filter by screwing it back into place. Tighten the cap securely to prevent leaks.
Step 8: Run a Drain Cycle
With the drain filter and hose reconnected, plug the dishwasher back into the electrical outlet. Turn on the water supply and select a drain-only cycle. This will flush any remaining water from the dishwasher and ensure that it is completely drained.
Troubleshooting Tips
- Dishwasher won’t drain: If the dishwasher fails to drain after following these steps, there may be a deeper issue. Check the power supply, water supply, or call a qualified appliance technician for assistance.
- Water leaks from the dishwasher: If you notice water leaking from the dishwasher after draining, inspect the drain filter and hose for proper installation. Tighten any loose connections or replace damaged components.
- Unpleasant odors from the dishwasher: If your dishwasher emits unpleasant odors, it may indicate a buildup of food particles or mold. Clean the drain filter and hose regularly, and consider using a dishwasher cleaner to eliminate odors.
Final Thoughts
Draining your GE dishwasher is a straightforward process that can resolve common issues such as standing water, odors, and potential mold growth. By following the steps outlined in this guide, you can ensure that your dishwasher is functioning optimally and provide a clean and sanitary environment for your dishes.
Frequently Asked Questions
Q: How often should I drain my GE dishwasher?
A: It’s recommended to drain your dishwasher every 3-6 months, or more frequently if you notice any issues with draining or water accumulation.
Q: Can I use bleach to clean the drain filter?
A: No, bleach should not be used to clean the drain filter as it can damage the filter and the dishwasher components. Use warm water and a mild dish soap instead.
Q: My dishwasher is still not draining after following these steps. What should I do?
A: If you have followed all the steps and your dishwasher is still not draining, it’s best to call a qualified appliance technician for further assistance. There may be a more serious issue that requires professional attention.
