What To Know
- Using a tape measure, measure the height of each leveling foot from the floor to the bottom of the foot.
- Once you have adjusted the leveling feet, double-check the leveling by placing the level on the top of the washing machine in both directions.
- Yes, you can use a regular level as long as it is long enough to span the width of the washing machine.
Leveling a washing machine is crucial for ensuring optimal performance, reducing noise, and preventing damage. If your Speed Queen washing machine is not level, it may vibrate excessively, make loud noises, or even malfunction. This comprehensive guide will provide you with step-by-step instructions on how to level your Speed Queen washing machine effectively.
Tools and Materials
Before you begin, gather the following tools and materials:
- Leveling feet wrench or spanner
- Level
- Tape measure
- Wooden shims or coins
Step 1: Unplug the Washing Machine
For safety reasons, always unplug the washing machine from the power outlet before starting any maintenance or adjustments.
Step 2: Locate the Leveling Feet
Most Speed Queen washing machines have four adjustable leveling feet, located at each corner of the base. These feet can be adjusted to raise or lower the machine to ensure it is level.
Step 3: Measure the Height of the Feet
Using a tape measure, measure the height of each leveling foot from the floor to the bottom of the foot. Make a note of the measurements.
Step 4: Adjust the Leveling Feet
Use the leveling feet wrench or spanner to adjust the height of the feet. Turn the feet clockwise to raise the machine and counterclockwise to lower it.
Step 5: Level the Machine Front-to-Back
Place the level on the top of the washing machine, parallel to the front and back edges. Adjust the leveling feet until the bubble in the level is centered.
Step 6: Level the Machine Side-to-Side
Rotate the level 90 degrees so that it is parallel to the side edges of the washing machine. Again, adjust the leveling feet until the bubble in the level is centered.
Step 7: Check the Leveling
Once you have adjusted the leveling feet, double-check the leveling by placing the level on the top of the washing machine in both directions. If the bubble is not centered, make further adjustments until the machine is completely level.
Final Adjustments
If necessary, use wooden shims or coins to provide additional support under the leveling feet. This can help prevent the machine from rocking or moving during operation.
Tips
- If you have difficulty adjusting the leveling feet, try using a rubber mallet to gently tap the wrench or spanner.
- Make sure to lock the leveling feet in place after making adjustments.
- Re-level your washing machine periodically, especially after moving it or if you notice any vibrations or noise.
Troubleshooting
If you are having trouble leveling your Speed Queen washing machine, here are some common issues and solutions:
- The machine is rocking: Check that the leveling feet are properly adjusted and locked in place. If necessary, use shims or coins to provide additional support.
- The machine is vibrating excessively: Make sure that the machine is level in both directions. Also, check for any loose parts or objects that may be causing the vibration.
- The machine is making loud noises: Leveling the machine can help reduce noise. If the noise persists, check for any loose parts or worn components.
Questions You May Have
Q: How often should I level my washing machine?
A: It is recommended to level your washing machine periodically, especially after moving it or if you notice any vibrations or noise.
Q: Can I use a regular level to level my washing machine?
A: Yes, you can use a regular level as long as it is long enough to span the width of the washing machine.
Q: What should I do if I can’t adjust the leveling feet with the wrench?
A: Try using a rubber mallet to gently tap the wrench or spanner. If that doesn’t work, contact a qualified appliance repair technician for assistance.
