Banish Bad Odors and Improve Dishwasher Efficiency: How to Clean Your GE Dishwasher Filter

Maintaining your dishwasher is crucial for ensuring its optimal performance and longevity. One of the essential maintenance tasks is regularly cleaning the dishwasher filter. If you own a General Electric dishwasher, understanding how to remove the dishwasher filter is paramount. This blog post will provide a comprehensive guide to help you remove the dishwasher filter from your General Electric appliance effortlessly.

Locating the Dishwasher Filter

The dishwasher filter is typically located at the bottom of the dishwasher tub. It can be either a cylindrical or a flat screen-like component.

Removing a Cylindrical Dishwasher Filter

Step 1: Unload the Dishwasher

Remove all dishes and utensils from the dishwasher.

Step 2: Open the Dishwasher Door and Locate the Filter

Open the dishwasher door and look for the cylindrical filter at the bottom of the tub.

Step 3: Turn the Filter Counterclockwise

Find the handle or knob on the filter and turn it counterclockwise to loosen it.

Step 4: Pull the Filter Up

Once the filter is loose, pull it up and out of the tub.

Removing a Flat Screen Dishwasher Filter

Step 1: Unload the Dishwasher and Remove the Lower Rack

Remove all dishes and utensils from the dishwasher and slide out the lower rack.

Step 2: Find the Filter

Locate the flat screen filter at the bottom of the dishwasher tub.

Step 3: Push Up on the Filter

Using your fingers or a tool, push up on the filter from the bottom.

Step 4: Pull the Filter Out

Once the filter is pushed up, pull it out of the dishwasher.

Cleaning the Dishwasher Filter

Once you have removed the filter, it’s important to clean it thoroughly.

Step 1: Rinse the Filter

Rinse the filter with warm water to remove any food particles or debris.

Step 2: Use a Soft Brush or Sponge

If necessary, use a soft brush or sponge to remove any stubborn dirt or grime.

Step 3: Reinstall the Filter

Once the filter is clean, reinstall it by following the steps in reverse order.

Replacing the Dishwasher Filter

If your dishwasher filter is damaged or worn out, it’s important to replace it promptly.

Step 1: Remove the Old Filter

Follow the steps outlined above to remove the old filter.

Step 2: Insert the New Filter

Take the new filter and insert it into the dishwasher tub.

Step 3: Turn the Filter Clockwise

Turn the filter clockwise to tighten it in place.

Step 4: Reinstall the Lower Rack and Load the Dishwasher

Slide the lower rack back into place and load the dishwasher with dishes.

Troubleshooting

Q: I can’t turn the filter counterclockwise.

• Make sure the dishwasher is turned off and unplugged.
• Use a pair of pliers to gently loosen the filter.

Q: The filter is stuck and won’t come out.

• Use a flathead screwdriver to gently pry the filter loose.
• If the filter is still stuck, contact a qualified appliance repair technician.

Final Note: Maintain a Clean Dishwasher for Optimal Performance

By following these steps, you can easily remove the dishwasher filter from your General Electric dishwasher and keep it clean and functioning properly. Regular filter maintenance will ensure your dishwasher continues to operate efficiently, providing you with sparkling clean dishes every time.

Basics You Wanted To Know

Q: How often should I clean my dishwasher filter?

• Clean the dishwasher filter every 1-2 months or more often if you notice reduced dishwasher performance.

Q: Can I use a dishwasher cleaner to clean the filter?

• Yes, you can use a dishwasher cleaner to help dissolve grease and grime from the filter.

Q: What are the signs of a clogged dishwasher filter?

• Reduced water flow, dishes not cleaning properly, and increased noise during the wash cycle.