What To Know
- This comprehensive guide will walk you through the steps on how to replace a Frigidaire microwave turntable motor, ensuring your microwave is back up and running in no time.
- Locate the screws holding the turntable motor in place at the bottom of the microwave.
- Replacing a Frigidaire microwave turntable motor is a straightforward process that can be completed with the right tools and safety precautions.
Is your Frigidaire microwave’s turntable not spinning? Don’t fret! Replacing the turntable motor is a relatively simple task that can be completed in under an hour. This comprehensive guide will walk you through the steps on how to replace a Frigidaire microwave turntable motor, ensuring your microwave is back up and running in no time.
Tools and Materials Required
- Phillips head screwdriver
- Socket wrench (optional)
- New Frigidaire microwave turntable motor
- Gloves (optional)
Safety Precautions
- Unplug the microwave from the power outlet.
- Allow the microwave to cool down completely.
- Wear gloves to protect your hands from sharp edges.
Step-by-Step Instructions
1. Remove the Outer Cover
- Locate the screws holding the outer cover in place at the back of the microwave.
- Remove the screws using the Phillips head screwdriver.
- Carefully lift off the outer cover.
2. Disconnect the Power
- Locate the wires connecting the turntable motor to the microwave’s power supply.
- Disconnect the wires by gently pulling them apart.
3. Remove the Turntable Assembly
- Lift the turntable and its plastic support out of the microwave.
- Set the turntable aside.
4. Remove the Turntable Motor
- Locate the screws holding the turntable motor in place at the bottom of the microwave.
- Remove the screws using the Phillips head screwdriver or socket wrench.
- Carefully lift out the turntable motor.
5. Install the New Motor
- Insert the new turntable motor into the microwave.
- Secure the motor in place with the screws.
6. Reassemble the Turntable Assembly
- Place the plastic support back into the microwave.
- Position the turntable on top of the support.
7. Reconnect the Power
- Reconnect the wires to the turntable motor.
- Ensure the wires are securely attached.
8. Reinstall the Outer Cover
- Align the outer cover with the microwave and slide it back into place.
- Secure the cover with the screws.
Tips for Success
- If the screws are rusted or difficult to remove, apply penetrating oil and allow it to sit for a few minutes before loosening them.
- Handle the microwave components with care to avoid damage.
- If you are not comfortable performing this repair, contact a qualified appliance repair technician.
Troubleshooting
- If the turntable still doesn’t spin after replacing the motor, check the power supply and ensure it is working properly.
- If the motor is noisy or vibrating, it may be defective and need to be replaced.
Takeaways
Replacing a Frigidaire microwave turntable motor is a straightforward process that can be completed with the right tools and safety precautions. By following the steps outlined in this guide, you can restore your microwave’s functionality and enjoy perfectly cooked meals again.
Answers to Your Questions
Q: How often should I replace the turntable motor?
A: The turntable motor typically lasts several years. However, it may need to be replaced more frequently if the microwave is used heavily.
Q: Can I use a generic turntable motor for my Frigidaire microwave?
A: It is recommended to use a genuine Frigidaire replacement motor to ensure compatibility and optimal performance.
Q: Is it safe to replace the turntable motor on my own?
A: Yes, if you have basic DIY skills and follow the safety precautions outlined in this guide. However, if you are not comfortable performing the repair, contact a qualified technician.
