What To Know
- Replacing a broken refrigerator door spring is a relatively simple task that can be completed in a matter of minutes.
- Align the holes in the door spring with the holes in the door frame.
- Replacing a GE refrigerator door spring is a simple task that can be completed in a matter of minutes.
Replacing a broken refrigerator door spring is a relatively simple task that can be completed in a matter of minutes. By following the steps outlined in this guide, you can save yourself the cost of calling a repair technician.
Tools and Materials You’ll Need
- Phillips head screwdriver
- Flathead screwdriver
- New refrigerator door spring
- Pliers (optional)
Step-by-Step Instructions
1. Unplug the Refrigerator
Before you begin working on your refrigerator, it’s important to unplug it from the power outlet. This will prevent you from getting shocked.
2. Remove the Kickplate
The kickplate is the panel at the bottom of the refrigerator. Use a screwdriver to remove the screws that hold it in place. Once the screws are removed, carefully pull the kickplate off.
3. Locate the Door Spring
The door spring is located on the inside of the refrigerator door. It is attached to the door frame with two screws.
4. Remove the Screws
Use a screwdriver to remove the two screws that hold the door spring in place. Once the screws are removed, carefully pull the door spring off the door frame.
5. Install the New Door Spring
Place the new door spring on the door frame. Align the holes in the door spring with the holes in the door frame.
6. Insert the Screws
Insert the two screws into the holes in the door spring. Tighten the screws until the door spring is securely attached to the door frame.
7. Reattach the Kickplate
Align the kickplate with the bottom of the refrigerator. Insert the screws into the holes in the kickplate. Tighten the screws until the kickplate is securely attached to the refrigerator.
8. Plug in the Refrigerator
Once the door spring is replaced, plug the refrigerator back into the power outlet.
Tips
- If you’re having trouble removing the old door spring, you can use a pair of pliers to help you.
- Be careful not to overtighten the screws when you’re installing the new door spring.
- If you’re not comfortable replacing the door spring yourself, you can call a repair technician.
Troubleshooting
- The door spring is broken. If the door spring is broken, it will need to be replaced.
- The door spring is not attached properly. If the door spring is not attached properly, it will not be able to hold the door open.
- The door is not aligned properly. If the door is not aligned properly, it will put stress on the door spring and cause it to break.
Conclusion
Replacing a GE refrigerator door spring is a simple task that can be completed in a matter of minutes. By following the steps outlined in this guide, you can save yourself the cost of calling a repair technician.
FAQ
Q: How do I know if my refrigerator door spring is broken?
A: If your refrigerator door is not staying open, it is likely that the door spring is broken.
Q: How much does it cost to replace a refrigerator door spring?
A: The cost of a new refrigerator door spring is typically between $10 and $20.
Q: Can I replace the refrigerator door spring myself?
A: Yes, you can replace the refrigerator door spring yourself. However, if you are not comfortable working on appliances, you can call a repair technician.
