What To Know
- In this comprehensive guide, we’ll walk you through the steps on how to replace timer in GE dryer, providing detailed instructions and troubleshooting tips to ensure a successful repair.
- If the dryer does not start after replacing the timer, check the power supply and the door switch.
- Replacing a timer in a GE dryer is a straightforward repair that can save you the cost of hiring a professional appliance repair technician.
If your GE dryer is giving you trouble with starting, stopping, or running continuously, you may need to replace the timer. Replacing the timer is a relatively simple repair that can be completed in about an hour. In this comprehensive guide, we’ll walk you through the steps on how to replace timer in GE dryer, providing detailed instructions and troubleshooting tips to ensure a successful repair.
Materials You’ll Need
- New GE dryer timer
- Screwdriver
- Pliers
- Wire strippers
Safety Precautions
Before you begin working on your dryer, be sure to:
- Unplug the dryer from the power outlet.
- Allow the dryer to cool down completely.
- Wear safety glasses to protect your eyes from debris.
Step-by-Step Instructions
1. Remove the Front Panel
- Open the dryer door.
- Locate the screws along the top and bottom edges of the front panel.
- Remove the screws and carefully lift the front panel off the dryer.
2. Disconnect the Timer Wires
- Identify the timer located behind the front panel.
- Use pliers to disconnect the wires connected to the timer terminals.
- Note the position of each wire before disconnecting it.
3. Remove the Old Timer
- Use a screwdriver to remove the screws holding the timer in place.
- Carefully pull the old timer out of its housing.
4. Install the New Timer
- Insert the new timer into the housing and align it with the screw holes.
- Secure the timer with the screws.
5. Reconnect the Timer Wires
- Reconnect the wires to the timer terminals in the same positions as they were before.
- Use pliers to crimp the wire connectors securely.
6. Reinstall the Front Panel
- Carefully lift the front panel back onto the dryer.
- Align the panel with the screw holes and insert the screws.
- Tighten the screws securely.
7. Test the Dryer
- Plug the dryer back into the power outlet.
- Start a drying cycle to test the new timer.
- Ensure that the dryer starts, runs, and stops as expected.
Troubleshooting Tips
- If the dryer does not start after replacing the timer, check the power supply and the door switch.
- If the dryer runs continuously, the timer may be defective or the start switch may be stuck.
- If the dryer stops prematurely, the timer may be set incorrectly or the heating element may be faulty.
Final Thoughts
Replacing a timer in a GE dryer is a straightforward repair that can save you the cost of hiring a professional appliance repair technician. By following the steps outlined in this guide and taking the necessary safety precautions, you can successfully complete this task and restore your dryer to proper working order.
Frequently Asked Questions
Q: Can I replace the timer on any GE dryer model?
A: The steps provided in this guide apply to most GE dryer models. However, it’s always a good idea to consult your dryer’s user manual or contact GE for specific instructions.
Q: How long will it take to replace the timer?
A: Replacing the timer typically takes about an hour. The actual time may vary depending on your experience level and the specific dryer model.
Q: Is it safe to replace the timer myself?
A: Yes, replacing the timer is a relatively safe repair if you follow the safety precautions and have basic electrical knowledge. If you are uncomfortable working with electrical appliances, it’s best to call a qualified appliance repair technician.
