What To Know
- If your Kenmore washing machine doesn’t have a reset button, you can reset it using the control panel.
- Turn the dial on the control panel to the “Off” position.
- What are the signs that indicate a need for a reset.
Experiencing trouble with your Kenmore washing machine? A reset can often resolve common issues and restore its functionality. Here’s a comprehensive guide on how to reset your Kenmore washing machine:
Power Cycle the Machine
1. Unplug the washing machine: Disconnect the power cord from the electrical outlet.
2. Wait 1 minute: Allow the machine to sit for a minute to discharge any residual power.
3. Reconnect the power: Plug the power cord back into the outlet.
Use the Reset Button
Some Kenmore washing machines have a dedicated reset button. If yours does, follow these steps:
1. Locate the reset button: It’s typically located on the control panel or behind the door.
2. Press and hold the button: Hold it for 5-10 seconds.
3. Release the button: The machine should reset.
Reset Using the Control Panel
If your Kenmore washing machine doesn‘t have a reset button, you can reset it using the control panel:
1. Turn the dial to “Off”: Turn the dial on the control panel to the “Off” position.
2. Press and hold the “Start” button: Hold the “Start” button for 10-15 seconds.
3. Turn the dial to “On”: Turn the dial back to the “On” position.
Factory Reset
If the previous methods don‘t work, you can perform a factory reset:
1. Unplug the washing machine: Disconnect the power cord from the outlet.
2. Locate the drain pump filter: Remove the drain pump filter at the bottom of the machine.
3. Disconnect the drain hose: Disconnect the drain hose from the drain pump.
4. Turn the machine upside down: Invert the machine and place it upside down on a towel.
5. Inspect the motor: Look for any loose connections or damaged wires.
6. Reconnect the drain hose and filter: Reattach the drain hose and drain pump filter.
7. Plug in the washing machine: Reconnect the power cord to the outlet.
Other Troubleshooting Tips
- Check the water supply: Ensure that the water supply is turned on and the hoses are connected securely.
- Inspect the drain hose: Make sure the drain hose is not kinked or clogged.
- Clean the detergent dispenser: Remove any detergent buildup to prevent clogs.
- Check the door switch: Ensure that the door is closed properly and the door switch is functioning correctly.
Wrapping Up
By following these steps, you should be able to reset your Kenmore washing machine and resolve common issues. If the problem persists, contact a qualified appliance repair technician.
Frequently Asked Questions
Q: How often should I reset my Kenmore washing machine?
A: Resetting your washing machine regularly is not necessary unless you experience issues.
Q: What are the signs that indicate a need for a reset?
A: Signs include error codes, strange noises, or the machine not responding to commands.
Q: Can I reset my Kenmore washing machine without unplugging it?
A: Yes, you can use the reset button or control panel methods mentioned above.
Q: Will a reset erase my washing machine settings?
A: No, a reset will not erase your settings.
Q: What should I do if none of the reset methods work?
A: Contact a qualified appliance repair technician for assistance.
