What To Know
- The control board is usually located behind the kickplate at the bottom of the refrigerator.
- To do this, set the multimeter to the ohms setting and touch the probes to the terminals on the control board.
- The cost of a Frigidaire refrigerator control board can vary depending on the model of your refrigerator.
The control board is the brains of your Frigidaire refrigerator. It’s responsible for managing all of the refrigerator’s functions, including the temperature, defrost cycle, and ice maker. If the control board fails, your refrigerator will stop working properly.
How to Test a Frigidaire Refrigerator Control Board
If you’re experiencing problems with your Frigidaire refrigerator, one of the first things you should do is test the control board. Here’s how:
1. Unplug the Refrigerator
Before you begin any testing, be sure to unplug the refrigerator from the power outlet. This will prevent you from getting shocked.
2. Locate the Control Board
The control board is usually located behind the kickplate at the bottom of the refrigerator. To remove the kickplate, simply unscrew the screws that are holding it in place.
3. Inspect the Control Board
Once you have the control board exposed, take a close look at it. Look for any signs of damage, such as burnt components or loose wires. If you see any damage, the control board will need to be replaced.
4. Test the Control Board
If you don’t see any visible damage, you can test the control board using a multimeter. To do this, set the multimeter to the ohms setting and touch the probes to the terminals on the control board. The multimeter should read a resistance of between 10 and 100 ohms. If the resistance is too high or too low, the control board will need to be replaced.
5. Reinstall the Control Board
If the control board tests good, reinstall it in the refrigerator. Be sure to tighten the screws that are holding it in place.
6. Plug in the Refrigerator
Once the control board is reinstalled, plug the refrigerator back into the power outlet. The refrigerator should start working properly again.
Troubleshooting Tips
If you’re still having problems with your Frigidaire refrigerator after testing the control board, there are a few other things you can try:
- Check the power cord to make sure that it’s plugged in securely.
- Check the circuit breaker or fuse to make sure that the refrigerator is getting power.
- Reset the refrigerator by unplugging it from the power outlet for a few minutes and then plugging it back in.
- Call a qualified appliance repair technician for assistance.
How to Prevent Control Board Failure
There are a few things you can do to prevent control board failure in your Frigidaire refrigerator:
- Keep the refrigerator clean. Dust and dirt can build up on the control board and cause it to overheat.
- Avoid overloading the refrigerator. Too much food can put a strain on the control board.
- Don’t unplug the refrigerator for extended periods of time. This can cause the control board to lose its memory.
- If you experience a power outage, wait a few minutes before plugging the refrigerator back in. This will give the control board time to reset.
Wrap-Up
By following these tips, you can help to keep your Frigidaire refrigerator running smoothly for years to come.
Popular Questions
1. How much does it cost to replace a Frigidaire refrigerator control board?
The cost of a Frigidaire refrigerator control board can vary depending on the model of your refrigerator. However, you can expect to pay between $100 and $300 for a new control board.
2. Can I replace the control board myself?
Yes, you can replace the control board yourself if you are comfortable working with electrical components. However, it is important to follow the instructions carefully and to be sure that you have the correct replacement part.
3. How long does it take to replace a control board?
Replacing a control board typically takes about 30 minutes to an hour. However, the time may vary depending on the model of your refrigerator.
