What To Know
- If you hear a humming noise when you turn on the dryer, it could indicate a faulty motor.
- By following the troubleshooting steps outlined in this guide, you can identify and address the underlying cause and restore your dryer to working order.
- The cost of repair will vary depending on the cause of the issue and the parts required.
If your LG dryer turns on but refuses to start, you’re not alone. This perplexing issue can leave you frustrated and without a working dryer. To resolve this dilemma, it’s crucial to understand the underlying causes. This comprehensive guide will delve into the common reasons behind this problem and provide step-by-step troubleshooting solutions.
Potential Causes and Troubleshooting
1. Power Issues
- Check the power cord: Ensure the cord is securely plugged into both the dryer and the outlet.
- Reset the circuit breaker: If the circuit breaker has tripped, reset it to restore power to the dryer.
- Inspect the outlet: Make sure the outlet is providing power by plugging in another appliance.
2. Door Switch Malfunction
- Close the door firmly: The door switch must be engaged to start the dryer. Close the door and press down on the latch to ensure a tight fit.
- Inspect the door switch: Look for any damage or misalignment that may prevent the switch from activating.
3. Motor Problems
- Listen for a humming sound: If you hear a humming noise when you turn on the dryer, it could indicate a faulty motor.
- Check the drive belt: The drive belt connects the motor to the drum. Inspect it for any cracks or tears.
4. Electronic Control Board Issues
- Reset the dryer: Unplug the dryer for 5 minutes and then plug it back in. This may reset the electronic control board.
- Contact a repair technician: If resetting the dryer doesn’t resolve the issue, it may require a replacement control board.
5. Thermal Fuse Blown
- Unplug the dryer: Before checking the thermal fuse, make sure the dryer is unplugged for safety reasons.
- Locate the thermal fuse: It’s usually located near the heating element.
- Inspect the thermal fuse: If it’s blown, you’ll need to replace it.
6. Lint Accumulation
- Clean the lint filter: Excessive lint can block airflow and prevent the dryer from starting.
- Inspect the exhaust vent: Ensure the vent is clear of lint and debris.
7. Other Potential Causes
- Faulty start capacitor: This capacitor helps the motor start.
- Broken timer: The timer controls the drying cycle.
- Loose wire connections: Check all wire connections for any loose or disconnected wires.
Resolving the Issue
1. Safety first: Always unplug the dryer before performing any troubleshooting.
2. Identify the potential cause: Use the troubleshooting guide to determine the most likely cause.
3. Inspect and test: Check the affected component for any damage or malfunction.
4. Repair or replace: If you can identify the faulty component, repair or replace it as needed.
5. Professional help: If you’re unable to resolve the issue on your own, contact a qualified appliance repair technician.
Troubleshooting Tips
- Use a multimeter to test electrical components for continuity and voltage.
- Refer to the LG dryer user manual for specific troubleshooting instructions.
- If you’re not comfortable working with electrical appliances, it’s best to seek professional help.
Wrapping Up
Understanding why your LG dryer is turning on but not starting is essential for resolving the issue effectively. By following the troubleshooting steps outlined in this guide, you can identify and address the underlying cause and restore your dryer to working order. Remember, safety is paramount when working with electrical appliances. If you encounter any difficulties or have concerns, don’t hesitate to contact a qualified technician.
Basics You Wanted To Know
Q: Can I reset my LG dryer myself?
A: Yes, you can reset your dryer by unplugging it for 5 minutes and then plugging it back in.
Q: How often should I clean my lint filter?
A: It’s recommended to clean the lint filter after every drying cycle to prevent lint accumulation.
Q: What are the signs of a faulty motor?
A: Humming noises, difficulty starting, and overheating can indicate a faulty motor.
Q: Can I replace the thermal fuse myself?
A: Yes, but make sure to unplug the dryer first and follow the manufacturer’s instructions.
Q: What is the cost of repairing a dryer that’s not starting?
A: The cost of repair will vary depending on the cause of the issue and the parts required. Contact a repair technician for an estimate.
